Pitch-Based Laminated Carbon Formed by Pressure Driving at Low Temperature as High-Capacity Anodes for Lithium Energy Storage Systems

Pitch has been used to prepare electrodes by high-temperature heat treatments for supercapacitors, lithium-ion batteries, on account of its rich aromatic ring structure. Here, the toluene-soluble component of pitch is used to prepare a kind of laminated carbon. This was realized by a template-free synthesis at low temperature with the addition of pressure. The toluene-soluble component has a small molecular weight, which makes the thermal deformation ability stronger and then enhances the orientation of the carbon layer with the help of pressure. The prepared anode exhibits a splendid electrochemical performance compared with the traditional graphite anode. A high stable capacity of approximately 550 mAh g⁻¹ at 50 mA g⁻¹, which is much higher than graphite (372 mAh g⁻¹), is obtained. Also, when the current density is up to 2 A g⁻¹, the capacity is about 150 mAh g⁻¹. Surprisingly, it also delivers a superior cycling performance. And when used as the anode/cathode electrode for lithium-ion capacitors, a high energy density can be obtained. The present work offers an opportunity to utilize the pitch source in lithium energy storage with promising cycle life, high energy/power density, and low cost.     

介孔碳材料抑制锂电池负极枝晶生长

为了解决锂电池负极表面锂枝晶生长带来的性能衰退和安全问题。 以沸石咪唑酯骨架-8(ZIF-8)为前驱体制得介孔碳材料(MCM),用于金属锂负极表面改性。 X射线粉末衍射(XRD)和拉曼光谱表明,退火制得的MCM具有一定的石墨化程度,N₂气吸脱附测试(BET)证明MCM具有典型的介孔特征。 对比不同温度退火样品的XRD、拉曼光谱和BET测试结果,确定900 ℃为最佳退火温度。 优化的MCM作为表面改性剂对金属锂负极进行改性研究。 电池充放电循环后,负极样品的XRD和扫描电子显微镜(SEM)测试表明,MCM能够通过均衡锂负极表面的电荷分布抑制金属锂的取向沉积和锂枝晶的生长。 本研究为制备抑制锂电池负极枝晶生长表面改性剂提供了一种简便而有效的合成方法,有利于锂电池循环寿命的延长和安全性能的提高。     

Doxorubicin Encapsulation in Carbon Nanotubes Having Haeckelite or Stone–Wales Defects as Drug Carriers: A Molecular Dynamics Approach

Doxorubicin (DOX), a recognized anticancer drug, forms stable associations with carbon nanotubes (CNTs). CNTs when properly functionalized have the ability to anchor directly in cancerous tumors where the release of the drug occurs thanks to the tumor slightly acidic pH. Herein, we study the armchair and zigzag CNTs with Stone–Wales (SW) defects to rank their ability to encapsulate DOX by determining the DOX-CNT binding free energies using the MM/PBSA and MM/GBSA methods implemented in AMBER16. We investigate also the chiral CNTs with haeckelite defects. Each haeckelite defect consists of a pair of square and octagonal rings. The armchair and zigzag CNT with SW defects and chiral nanotubes with haeckelite defects predict DOX-CNT interactions that depend on the length of the nanotube, the number of present defects and nitrogen doping. Chiral nanotubes having two haeckelite defects reveal a clear dependence on the nitrogen content with DOX-CNT interaction forces decreasing in the order 0N > 4N > 8N. These results contribute to a further understanding of drug-nanotube interactions and to the design of new drug delivery systems based on CNTs.     

The Impacts of Crystalline Structure and Different Surface Functional Groups on Drug Release and the Osseointegration Process of Nanostructured TiO2

In implantable materials, surface topography and chemistry are the most important in the effective osseointegration and interaction with drug molecules. Therefore, structural and surface modifications of nanostructured titanium dioxide (TiO₂) layers are reported in the present work. In particular, the modification of annealed TiO₂ samples with —OH groups and silane derivatives, confirmed by X-ray photoelectron spectroscopy, is shown. Moreover, the ibuprofen release process was studied regarding the desorption-desorption-diffusion (DDD) kinetic model. The results proved that the most significant impact on the release profile is annealing, and further surface modifications did not change its kinetics. Additionally, the cell adhesion and proliferation were examined based on the MTS test and immunofluorescent staining. The obtained data showed that the proposed changes in the surface chemistry enhance the samples’ hydrophilicity. Moreover, improvements in the adhesion and proliferation of the MG-63 cells were observed.     

Surface Polymers on Multiwalled Carbon Nanotubes for Selective Extraction and Electrochemical Determination of Rhodamine B in Food Samples

In this study, we combine magnetic solid phase extraction (MSPE), with the screen-printed carbon electrode (SPCE) modified by a molecular imprinted polymer (MIP) for sensitive and selective extraction and electrochemical determination of Rhodamine B in food samples. A magnetic solid phase extraction (MSPE) was carried out using magnetic poly(styrene-co-divinylbenzene) (PS-DVB) and magnetic nanoparticles (MNPs) synthetized on the surface of multiwalled carbon nanotubes (MWCNTs). An MIP was prepared on the surface of MWCNTs in the presence of titanium oxide nanoparticles (TiO₂NPs) modifying the SPCE for the rapid electrochemical detection of Rhodamine B. The MIPs synthesis was optimized by varying the activated titanium oxide (TiO₂) and multiwalled carbon nanotubes (MWCNTs) amounts. The MSPE and electrochemical detection conditions were optimized as well. The present method exhibited good selectivity, high sensitivity, and good reproducibility towards the determination of Rhodamine B, making it a suitable method for the determination of Rhodamine B in food samples.     

The green synthesis of exceptional braided,helical carbon nanotubes and nanospiral platelets made directly from CO2

Helical carbon nanotubes currently cost ~15,000–19,000 USD/kg commercially and are ~10–15 times the price of straight carbon nanotubes of similar dimensions. They have not previously been made from the greenhouse gas CO₂ nor had new variants of the helical morphology been demonstrated. In this study, a novel, inexpensive electrosynthesis of these helical nanocarbon materials from CO₂ is presented. This material may be produced by molten carbon growth conditions that (1) maximize torsional stresses, such as those that may occur during rapid, nucleated carbon reduction, (2) enhance defects that cause formation of heptagonal, rather than the conventional hexagonal building blocks of graphene cylindrical walls, and (3) uniformly control those enhanced defects to repeatedly induce a uniform spiral conformation. These conditions are achieved with at least two of the following experimental conditions: (i) high electrolysis current density, (ii) sp³ defect-inducing agents, such as added oxide, and (iii) controlled concentration of iron added to the electrolyte or cathode. Here, it is shown with SEM, TEM, EDX, XRF, and Raman spectroscopy that a molten controlled electrolyte carbonate synthesis to induce defect formation, and a high rate of electrolysis (0.6 A/cm²) leads to a high yield of helical nanotubes, helical nanofibers, or helical nanoplatelet carbon morphologies.     

g-C3N4催化石墨化碳质材料的制备及光催化性能研究

通常采用以氢氧化物作为造孔剂,过渡金属硝酸盐或氯化物作为石墨化催化剂的传统两步法策略制备多孔石墨化碳材料。然而制备过程中多涉及有毒和腐蚀性试剂,且多步骤的过程耗时较长。本文以双氰胺为原料通过热缩聚反应得到g-C₃N₄,采用高铁酸钾为催化剂一步法实现g-C₃N₄的同步碳化-石墨化,并研究其光催化性能。与传统的两步法相比,该方法耗时少、效率高、无污染。与初始的g-C₃N₄材料相比,石墨化g-C₃N₄衍生碳质材料不仅显著改善了可见光的吸收,而且大大增强了光催化活性。研究了不同石墨化温度对g-C₃N₄衍生碳质材料在可见光下降解甲基橙溶液的影响。700 ℃下制备的衍生碳质材料的降解率为12.4 mg/g。光电化学测试结果表明,多孔g-C₃N₄衍生碳质材料的光生载流子密度、电荷分离和光电流(提高了5.4倍)均得到显著提高。因此,该简便、灵活方法为提高g-C₃N₄衍生碳质材料的吸附和光催化性能提供了一种有前景的、高效的途径。     

MCNOs/CdS双效光催化剂的制备及其性能研究

水热合成法制备了不同磁性纳米洋葱碳(MCNOs)负载量(0%、1%、3%、5%)的MCNOs/CdS光催化剂。并通过X射线衍射分析(XRD)、扫描电子显微镜(SEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)、紫外可见光光谱(UV-Vis)、磁滞回线测定仪(VSM)对其进行表征,探究了MCNOs负载比例对催化剂在可见光下降解RhB性能及机理的影响。结果表明,MCNOs能有效提高CdS的光催化效果,复合3%MCNOs后降解率为96%,与纯CdS相比降解率提高了30%,磁性分析表明,其具有良好的顺磁性并能实现催化剂的有效回收。MCNOs/CdS在可见光下催化降解RhB的一级反应动力学直线有较好的拟合度,表明制备的催化剂有较好的催化活性。     

以尿素为氮源合成AlN粉体过程中非晶碳的石墨化

针对有机合成过程中碳及碳化物的残余,传统方法中普遍使用除碳的工艺,而很少有文章针对非晶碳的结构和形貌进行表征。为此,本文采用高尿素含量的前驱盐体系,通过在氮气保护气氛中煅烧获得AlN粉体。采用X射线衍射分析、红外和拉曼光谱分析、扫描电子显微镜和透射电子显微镜对850~1 500 ℃温度范围内煅烧获得产物的结构和形貌进行表征,对AlN合成过程中含碳产物结构形貌的变化,以及AlN和含碳产物之间相互的依存生长关系进行分析。结果表明,AlN生长的过程中伴随着无定形碳的石墨化转变,AlN颗粒的形貌也受含碳残余产物形貌的影响而出现有规律的变化。     

Effect of sodium dodecyl sulfate on CO2 and H2S absorption enhancement of functionalized multiwall carbon nanotubes in water: Experimental study and empirical model

A single bubble absorption column was used to examine the effect of hydrodynamic on carbon dioxide (CO₂) and hydrogen sulfide (H₂S) absorption in pure water and water-based nanofluids dispersed with neat, and OH and NH₂ functionalized multiwall carbon nanotubes (MWCNTs). Sodium dodecyl sulfate (SDS) was used as a surfactant and stabilizer. The maximum absorption of CO₂ and H₂S were found to be 0.0038 mmol/m²·s and 0.056 mmol/m²·s using NH₂-MWCNTs /nanofluid with 0.5 wt% content, respectively. The diffusion coefficients of gases into the nanofluids were computed by using an equation attained based on Dankwert’s theory. A last, an empirical correlation was proposed to determine the Sherwood number for the absorption of the aforementioned gases into the nanofluids.